From LA NACION · LA NACION · · 1m 30s
How to fix damp walls in old houses
A Spanish mason explains the step-by-step technique to repair humidity damage in homes built with adobe or concrete blocks.
In brief
A Spanish mason explains the step-by-step technique to repair humidity damage in homes built with adobe or concrete blocks. Santiago, a Spanish mason, shares a method to repair capillary damp in old houses by chipping away damaged material and applying consolidant, resin and breathable lime mortar. Originally reported…
Damp rises from below in old homes

Humidity in houses is common in warm or temperate climates where water filters through foundations and corrodes the structure over time. Old homes built with adobe or concrete blocks are especially vulnerable.
Understanding capillary damp
Santiago, a Spanish mason, explains that capillary damp means humidity rises from below upwards. This normally happens in old houses with adobe or concrete block walls.
“Estamos tratando humedades por capilaridad. ¿Qué quiere decir esto? Que la humedad viene de abajo para arriba, y esto normalmente ocurre en casas antiguas con paredes de adobe o de bloque de hormigón de los antiguos”
Step one: chip away the damage
Using a pneumatic tool, Santiago chips away all the damp to begin the repair process. He must reach the firm surface underneath the damaged material.
“Para arreglar una pared con humedad hay que picar hasta llegar a la superficie firme”
Steps two and three: bond and consolidate
After chipping, Santiago applies a bonding agent to the earth wall and soaks it thoroughly to create perfect adhesion. Once dry, he applies a consolidant product.
Step four: breathable lime mortar
Santiago applies breathable lime mortar in thin layers because it allows the wall to dry properly. Plastic sheeting would not work as it leaves a powder residue when dry.
“Vamos a agarrar mortero de cal transpirable (muy importante el mortero de cal para tratar estas humedades)”
Final finish with sanding
Once the lime mortar is applied, Santiago uses a sponge float to sand the surface smooth. The complete process chips away damp, applies consolidant, resin and breathable lime mortar.
“Con esto, ya tendrás todas las humedades completamente reparadas”
The short version
Santiago, a Spanish mason, shares a method to repair capillary damp in old houses by chipping away damaged material and applying consolidant, resin and breathable lime mortar.
Read the TL;DR — this story on one card.

/file/attachments/3000/crash_793663.jpeg)



