PCMAG
Cover art for FAA Pauses Router Upgrades After Nationwide Ground Stop

FAA Pauses Router Upgrades After Nationwide Ground Stop

FAA halts Juniper router installations to prevent repeat of nationwide flight ground stop.

By ·

Nov 17, 2026

8 cards · 1m 40s · tap to begin

From · · · 1m 40s

FAA Pauses Router Upgrades After Nationwide Ground Stop

FAA halts Juniper router installations to prevent repeat of nationwide flight ground stop.

In brief

FAA halts Juniper router installations to prevent repeat of nationwide flight ground stop. The FAA paused installing new Juniper routers after a nationwide ground stop caused 12,462 flight cancellations due to a router misconfiguration. Originally reported by PCMAG.

FAA suspends router installations

The Federal Aviation Administration temporarily suspended installing new routers from Hewlett Packard Enterprise's Juniper Networks to avoid repeating last Friday's nationwide ground stop.

Ground stop impact

Last Friday's outage caused a nationwide ground stop lasting nearly five hours with 12,462 flight cancellations at US airports.

Root cause identified

Root cause identified

The FAA blames the disruption on L3Harris installing a new Juniper router at an FAA site in El Dorado, Arkansas, scheduled to switch from copper lines to fiber.

Router misconfiguration

The router misconfiguration caused data to flood the agency's telecommunications infrastructure at a rate of 1,000 connection attempts every 4 to 5 seconds.

System instability

The outage affected 17 of 22 Air Route Traffic Control Centers and spread into several Terminal Radar Approach Controls.

Democratic lawmakers request pause

Democratic lawmakers sent a letter to Transportation Secretary Sean Duffy requesting an immediate pause on deploying additional Juniper devices.

Duffy's statement

Transportation Secretary Sean Duffy noted, 'This was the 69th installation of that router. Sixty-eight times it worked well. This one, the router started to broadcast into our network, and it started to overload the network.'

“This was the 69th installation of that router. Sixty-eight times it worked well. This one, the router started to broadcast into our network, and it started to overload the network.”

Investigation ongoing

L3Harris is examining the Juniper router with help from Cisco, HPE, the FAA, and the FBI to address safety and reliability concerns.

The takeaway

The FAA paused installing new Juniper routers after a nationwide ground stop caused 12,462 flight cancellations due to a router misconfiguration.

Read the original on PCMAG

Read the TL;DR — this story on one card.

How we make summaries

React

Sign in to react and comment.

Comments (0)

Life is short. Keep it sweet. Respect others' opinions and be kind!

    Recommended next

    More decks on faa and related topics.