# Why your iPad won't charge and how to fix it

> Most iPad charging problems stem from faulty cables or chargers, but a few simple tests can pinpoint the real culprit.
- Title: Why your iPad won't charge and how to fix it · Engadget
- Summary: Most iPad charging problems stem from faulty cables or chargers, but a few simple tests can pinpoint the real culprit. Test your iPad with multiple cables…
- Keywords: ipad, charging problems, troubleshooting, apple, charger, cable, battery, hardware repair, technical support, technology, won't, charge
- Source: Engadget — https://engadget.com/2258268/why-ipad-not-charging-fixes
- Author: Dave Meikleham
- Published: 2026-09-19T17:30:00+00:00
- Read time: 2 min
- Topics: ipad, charging problems, troubleshooting, apple, charger, cable, battery, hardware repair, technical support, technology
## iPad won't charge? Don't panic
A dead iPad usually means a faulty charger or cable, not a bricked device. Start by testing different charging accessories and outlets to isolate the problem.
## Use the right charger for your iPad
iPads need heavier-duty chargers than iPhones due to their larger batteries. Use official Apple chargers or quality third-party ones rated for at least 10W of power.
## Test multiple cables and outlets
Swap between different cables, chargers, and wall outlets to identify which component is faulty. If some work but others don't, the accessory is bad, not your iPad.
## Check for port damage or blockage
Use your phone's flashlight to inspect the charging port for bent pins, scratches, or discoloration. Lint or dust buildup can also prevent charging, so gently clean with a soft brush.
## Temperature matters for charging
Apple recommends charging between 32°F and 95°F. Extreme heat or cold can slow or stop charging to protect the lithium-ion battery.

> temperatures between 32°F to 95°F are optimal for safe charging conditions
## Revive a deeply drained iPad
If your iPad has been unused for weeks or months, its battery may be completely dead. Leave it on the charger for an extended period before expecting it to power on.
## Force restart your iPad
If the charger and port are fine, perform a hard reset. For modern iPads without a Home button, press Volume Up, then Volume Down, then hold Power until the Apple logo appears.
## For older iPads with Home button
Hold the Power and Home buttons together until the Apple logo appears. This forces a restart without deleting any data.
## Contact Apple if nothing works
If your iPad still won't charge after testing accessories and forcing a restart, contact Apple Support. Port damage may be covered under warranty or AppleCare.
## Key takeaway

Test your iPad with multiple cables and chargers across different outlets to rule out accessory problems before suspecting hardware damage.