From Engadget · Mariella Moon · · 1m 10s
FAA halts router rollout after ground stop
A Juniper Networks router malfunctioned and flooded the air traffic control system with data, forcing the FAA to ground all US flights on November 13.
In brief
A Juniper Networks router malfunctioned and flooded the air traffic control system with data, forcing the FAA to ground all US flights on November 13. The FAA suspended installation of a Juniper Networks router after one malfunctioned during a modernization project, causing a nationwide flight ground stop on November…
Router floods air traffic control system
A Juniper Networks router installed at an FAA site in El Dorado, Arkansas started broadcasting data into the network and overloading it on November 13, forcing a nationwide flight ground stop.
“This one router started to broadcast into our network, and it started to overload the network.”
FAA suspends new router installations
The Federal Aviation Administration suspended installation of the Juniper Networks router model and disabled more than sixty routers already installed as part of its modernization efforts.
Contractor was switching to fiber lines

A contractor from L3Harris was working to switch telecommunication lines from old copper wires to fiber and install the new router when the malfunction occurred at the Arkansas site.
Duffy calls for fifty billion in funding
Transport Secretary Sean Duffy renewed calls for Congress to approve an additional fifty billion dollars to modernize America's air traffic control system, saying the old network poses increasing safety risks.
“The longer we stay on an old rickety network, the less safe it becomes.”
The main idea
The FAA suspended installation of a Juniper Networks router after one malfunctioned during a modernization project, causing a nationwide flight ground stop on November 13.
Read the TL;DR — this story on one card.


